Software basic functions
The software is used for the centralized management of the monitoring points and equipments, and the data sent to the host, and the host computer is calculated and sorted..
Software mainly monitors, control and alarm three chunks.
The software panel is provided with graphics display function, and can visually see the current data of the supervisor viewpoint, and can also carry on the trend analysis to the Department data, at any time to master the change.
When the alarm situation occurs when the system will appear tips,
And according to the specified operation automatically pre processed, and the alarm information stored in each monitoring equipment parameters can also be set in the interface of software, and can be part of the operation control, remote control.
System can be the hot standby, when a host of problems can be by another host to replace the management function, and does not appear out of control situation, increase system reliability.
For the collected data, you can choose to save the data for future queries, you can also send the required content by the printer.
The main features of the system
The system of data acquisition, detection and control of basic embedded system technology design.
The compact configuration and rugged structure design are suitable for running under severe environment..
Modular design, configuration flexibility.
Functional module type complete.
Using RS485 bus dual redundancy design, safe and reliable.
Flexible system software can handle all kinds of switch signal, analog signal, such as voltage signal, current signal, thermal resistance, thermocouple signal and pulse signal.
The system has powerful data acquisition function.
The system has the function of fault self checking.
The main modules of the system are as follows
Switch input module:
16 way switch input, passive contact, often closed often open, the input side of the isolation. Double bus output.
4~20MA current input module:
16 4~20MA current input, dual bus output.
0~10V input module:
16 0~10V voltage input, dual bus output.
PT100 input module:
8 PT100 input, temperature range of 40~200, accuracy of 1 degrees. Double bus output.
Thermocouple input module:
8 Thermocouple Input, temperature 200~800, accuracy of 1 degrees. Double bus output.
Switch output module:
8 relay output, each way through the network communication mode independently control. Double bus interface communication.
Analog output module:
4~20MA current (or optional 0~10V) output. Double bus interface communication.
Warning light board:
16 way indicator light independent of the various alarm signals, a sound tips. The alarm signal is acquired from the bus network and the dual bus interface is. The test button, mute button, reset button.
Extended alarm plate:
16 way indicator light independent of the various alarm signals, a sound tips. The alarm signal is acquired from the bus network and the dual bus interface is. The test button, mute button, reset button. |
